Drilled the header at the top of the wall and the cross bar between the studs with a 4 foot installers drill bit. A bit of trouble pulling the wire as the hole is a bit small. When drilling the header an auger bit in a heavy drill works best. The installers bit tends to go to the corner if the cross bar is at a 45 degree angle, this will reduce the effective diameter and make it harder to get the cable through. Also any loose materiel in the wall may plug the hole.
- Casa Collier
- San Diego, California, United States
- It's like a chinese puzzle, fitting the new pieces in with the old and blending it so it all looks old.
No comments:
Post a Comment