Seriously Pulling Wire

Obtained a ¾” installer bit in the morning. This will make a slightly bigger hole for getting the romex through as well as all the AV/Network lines. The New bit cuts fast but the point gets broken off on the third hole. This makes it impossible to gat a purchase on the cross bars as they are at a 45 degree angle. Since the bit fits inside a ¾” piece of conduit I will need to get a new bit and use the conduit as a guide. Regardless I was able to get two lines of 12 gauge up the walls and three lines of Phone/Cable/Network up one more hole. The communications wires were pulled sequentially by taping each line to the next about three feet apart.